Home » Blog » TOPGREENER In-Wall PIR Motion Sensor Light Switch, Single Pole Occupancy Sensor Switch, Motion Sensor Switch, Need Neutral Wire, Wall Plate Included, On/Off Override, 4A, 500W, TSOS5-W, White, 2 Pack

Blog

TOPGREENER In-Wall PIR Motion Sensor Light Switch, Single Pole Occupancy Sensor Switch, Motion Sensor Switch, Need Neutral Wire, Wall Plate Included, On/Off Override, 4A, 500W, TSOS5-W, White, 2 Pack

Tech Under 30

April 10, 2026

0 Views 0

SaveSavedRemoved 0

Price: $28.99
(as of Apr 10, 2026 10:58:46 UTC – Details)

Product description

On/Off Switch & Automatically Sensor Topgreener In Wall PIR Motion Sensor Light Switch

A simple yet effective way to add light automation. This innovative device combines an occupancy sensor with an always-on switch, allowing for seamless lighting control. Enhance your home with the TSOS5 Motion Sensor Switch

Occupancy Sensor

Automatically Turns Lights ON and OFF

By sensing the difference between heat emitted from the human body in motion and background space.

For garages, closets

The Lights Will Remain On

Ideal for use in garages, and other areas that necessitate continuous and precise operation.

Perfect for Studios

Suitable for multimedia environment

The light will not illuminate automatically whether or not the PIR sensor is activated.

1 Auto ON/OFF

2 Always On Mode

3 Always OFF Mode

Single-Pole Passive Infrared Motion Sensor Switch

This occupancy sensor has a 180-degree field of view; the sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage within a space, motion-activated sensors and variable delay time between 15 seconds, 10 minutes, 20 minutes, and 30 minutes. Neutral wire required.

1

2

3

4

5

Perfect for Ventilators

Ideal for Locations with Turbulent Exhaust Airflow

Expanding automation beyond just lighting. Particularly for use in damp and airtight basements.

Ground Wire Required

Ideal for the Home built after the mid-80s

The devices require a neutral wire, enhancing the devices’ performance and stability.

Switch the Auto & Manual

The Manual Switch Overrides the Motion Sensor

The manual switch takes precedence over the motion sensor in controlling the device.

Perefect for Pantries

Single-Pole Control

Ideal for environments with limited space and minimal windows or glass.

1 Fan Control

2 Neutral Wire Required

3 Sensor Override

4 Single-Pole

Auto Mode

Mind Knowing That Your Lights Will Always Turn OFF

Providing simple automation and keeping you 100% hands-free. Add convenience to your daily routine.

Easy to Located

Automatically ON When Load is Off

Avoid fumbling in the dark or entering a room with your hands full searching for the light switch.

Coverage Area 980 sq. ft

Thus Enhancing the Detection of Small Movements

Perfect for areas like your hallway, stairway, closet, bathroom garage, and more!

1 Hands-Free

2 LED Indicator

3 Easy to Install

4-Wire PIR Motion Sensor: Wiring Requirements

1. Sensor wired but not working?

The two most common causes are:

Cause 1: Reversed Hot/Load. Our sensor has polarity. Your original switch might not. The Hot and Load wires must be correct. Cause 2: Misidentified Wires. The Previous installation may not have distinguished Hot from Load. Always use a voltage tester to confirm the Hot wire. Do not trust wire colors alone.

2. KNOB Button

KNOB timer: The pointer must be turned to align exactly with one of the numbered time settings (15s, 10min, 20 min, 30min). If left between two numbers, the timer will not activate. It offers preset timing options only.

KNOB Range: The knob can be set to any position within its range. This allows you to fine-tune the delay time for specific room conditions, such as room size and ambient light.

3. NEUTRAL WIRE MANDATORY This device will ABSOLUTELY NOT function without a neutral wire connection.

TOPGREENER PIR Motion Sensor Selections

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.3 out of 5 stars 3,079

4.3 out of 5 stars 1,798

4.3 out of 5 stars 1,856

4.1 out of 5 stars 546

4.2 out of 5 stars 2,458

3.8 out of 5 stars 25

Price

$28.99$28.99

$26.99$26.99

$27.99$27.99

$26.59$26.59

$41.99$41.99

$27.99$27.99

Circuits

Lights

Lights

Lights

Lights

Lights

Lights

PIR Motion Sensor Provided For

Auto ON/OFF

Auto ON/OFF

Auto ON/OFF

Auto ON/OFF

Auto ON/OFF

Auto ON/OFF

Time Delay Effective Position

15s, & 10, 20, 30 Mins

15s, & 10, 20, 30 Mins

15s, & 10, 20, 30 Mins

15s, & 10, 20, 30 Mins

15s, & 5, 10, 15, 20, 30 Mins

15s, & 10, 20, 30 Mins

Neutral Wire Required

✔

✘

✘

✘

✘

✔

GrounB08R364D94ire Required

✔

✘

✔

✔

✔

✔

Feature

Manual ON/OFF

Simply Replace the Switch

For built before the mid-80s

OCCD/OCCS/VACD

Dimmer Function

More stable, less interference

Warm-Up Required

No

Yes, 1-2 Mins

Yes, 1-2 Mins

Yes, 1-2 MinsB078SKS6LS

Yes, 1-2 Mins

No

𝐍𝐞𝐮𝐭𝐫𝐚𝐥 𝐖𝐢𝐫𝐞 𝐑𝐞𝐪𝐮𝐢𝐫𝐞𝐝. 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room. Wall Plate Included
𝐒𝐢𝐧𝐠𝐥𝐞 𝐏𝐨𝐥𝐞 only. Not suitable for 3 way or multiple way. AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
Max Sensor Coverage Area 980 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%, UL listed.
Occupancy sensor light switch variable time delay: 15 sec (test mode), 10 min, 20 min, 30 min, If the device does not work after installaton, please contact our support team
Please check with a qualified electrician to determine if you have the proper wiring. If the device does not work after installaton, please contact our support team