Fingerprint Cabinet Lock, Keyless Hidden File Biometric Drawer Lock, Smart Fingerprint Lock for Home Office, No Drilling, Thickened Zinc Alloy

Product Description

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

OVEL FLOWER DESIGN SHAPE

It matches well with interior decor, beautifully reflecting your pursuit of aesthetics and quality.

AFTIFICIAL INTELLIGENCE FINGERPRINT IDENTIFICATION

Every time unlock, it will improve pass rate by stitching and self-learn algorithms.

THICKENED SOLID STEEL LOCK BODY

Drop-proof and Shock-proof and Dust-proof. BUT NOT WATERPROOF.

LOW CONSUMOTION AND LONG LIFE

180 days of continuous use when fully charged.

Warm Tip:

Please Confirm the Size Before Purchase

Only cabinets/drawers that meet the size do not need to be punched.The lock has been upgraded, so that the lock body can be rotationally mounted in any direction. If you want to change the orientation of the latch, there is no need to change the latch, just rotate the lock body and install it in the direction the latch needs to be locked.

Lock Installation Cabinet Lock Installation

Remove 2 screws of the lock tongue. Take down the bolt, nut, and gasket.As picture shows, insert the fingerprint lock, then install the gasket. Use screw to fasten the gasket. In the end, install the Lock Tongue and fasten it.Adjust the Lock Tongue direction according to door opening direction. Drawer Lock Installation

Drill a hole from the top edge. (If the original holes meet the size, no additional drill is required）Insert the lock body and install the fingerprint part .Then insert the gasket between the lock body anddrawer back panel. In the end, use screws to fasten.Install the lock washer on drawer.

Operation of Fingerprint Setup

Administrator Fingerprint Entry 1. Press the finger for 6S until the blue led blinks, remove finger. 2. With the blue led always on, press finger. Press 3 times consecutively. 3. The blue led blinks continuously and then goes out, fingerprint setting is successful.User Fingerprint Entry 1. Use admin’s finger to press for 6S until the blue led blinks, remove finger. 2. With the blue led on, press user’s finger. Press 3 times continuously. 3. The blue led blinks continuously and then goes out, fingerprint setting is successful.Fingerprint Delete 1. Use the admini fingerprint to press for 15S (blue led blinks, keep pressing) 2. Until the red led blinks, press again using the admin fingerprint. 3. Blue light blinks 3 times and then goes out, fingerprint deletion is successful.

How long does it take to fully charge?

1.5 Hour charging time, 180 days use. Charging: Blue LED Flashes; Fully Charged: Blue LED Off.

If you encounter a situation where the product cannot be charged, please do the below actions to check:

01 Please confirm the charging power. 02 Please check the light status： Is it in charging state or low battery state？

Fast battery consumption.

The suitable operating temperature is -10°C to 50°C. If the temperature is too low or too high, it will consume the battery. Besides that, you use it more frequently, the battery consumption will also consume fast.

Any fingerprint can unlock.

May be fingerprint is not set up successfully. During the setup, when the blue light blinks twice after each fingerprint press, it is successful; when the blue and red light blink alternately after 5 collections, fingerprint setup is successful.

Multiple attempts to unlock.

There is a difference between the angle at which your finger was recorded when set fingerprint and the angle at which your finger was placed when you unlocked, resulting in incomplete recognition and failure to unlock the device.

Keyless Entry with Fingerprint Unlocking. Prevents the anxiety and physical exhaustion associated with losing keys. The lock is easy to install and set up, and can be easily handled by people of all ages. This lock is suitable for cabinet or drawer holes with a diameter of 0.7 inches and panel thicknesses less than 0.87 inches. Please confirm the dimensions before purchasing.
360° Omnidirectional Installation Angle. The lock bolt can be installed towards any angle, making this lock suitable for cabinets/drawers of any opening direction. It can operate for 180 days on a 2-hour charge. The lock features a low battery alert and a USB emergency charging port, ensuring that you are never locked out due to a dead battery.
20 Fingerprint Settings. The lock can be programmed with 2 administrator fingerprints and 18 user fingerprints. You can set up access for family members or trusted friends, allowing you to share secrets, items, etc., with trusted individuals, thereby increasing trust among family and friends and possibly providing a convenient shared usage experience.
AI Recognition. This lock utilizes state-of-the-art biometric technology, ensuring that only preset fingerprints can unlock it, greatly reducing the risk of unauthorized access. For storing personal, private, or important documents, and valuables, this fingerprint cabinet lock offers a highly reliable security solution.
High-Quality Design. The lock body is made of zinc alloy with a polished surface, giving it a bright color and superior quality. The novel flower design shape matches well with interior decor, beautifully reflecting your pursuit of aesthetics and quality.